Download this page only in PDF format
Download the Medium Duty Series 01 Section in PDF format
Size | A | B | C | D | E | F | H | Max. ΔP | Approx. Wt. (Lb.) |
2" | 2 | 3-7/8 | 5-3/8 | 1-1/2 | 3-7/8 | 4-1/4 | 1/2 | 150 | 9# |
2-1/2" | 2-1/2 | 4-1/8 | 5-5/8 | 1-1/2 | 4-5/8 | 4-1/4 | 1/2 | 150 | 10# |
3" | 3 | 4-3/8 | 5-7/8 | 1-1/2 | 5-1/8 | 4-1/4 | 1/2 | 150 | 11# |
4" | 4 | 4-7/8 | 6-3/8 | 1-1/2 | 6-3/8 | 4-1/4 | 1/2 | 125 | 12# |
5" | 5 | 5-3/8 | 6-7/8 | 1-1/2 | 7-1/2 | 4-1/4 | 1/2 | 100 | 15# |
6" | 6 | 5-7/8 | 7-3/8 | 1-1/2 | 8-1/2 | 4-1/4 | 1/2 | 80 | 17# |
8" | 8 | 7-3/4 | 9-5/8 | 1-7/8 | 10-3/4 | 5-1/8 | 3/4 | 90 | 32# |
10" | 10 | 8-3/4 | 10-5/8 | 1-7/8 | 13 | 5-1/8 | 3/4 | 70 | 40# |
12" | 12 | 9-3/4 | 11-5/8 | 1-7/8 | 15-1/4 | 5-1/8 | 3/4 | 50 | 50# |
14" | 13-1/8 | 10-1/2 | 12-1/8 | 1-7/8 | 16-3/8 | 5-1/8 | 3/4 | 30 | 70# |
Size | A | B | C | D | E | F | H | Max. ΔP | Approx. Wt. (Lb.) |
16" | 15-1/8 | 12-3/4 | 14-1/2 | 2-3/8 | 18-1/4 | 5-1/8 | 1 | 40 | 122# |
18" | 17-1/8 | 13-7/8 | 15-1/2 | 2-3/8 | 20-3/4 | 5-1/8 | 1 | 30 | 155# |
20" | 19-1/8 | 14-7/8 | 16-1/2 | 2-3/8 | 22-3/4 | 5-1/8 | 1 | 25 | 192# |
22" | 21-1/8 | 16-1/2 | 17-1/2 | 2-3/8 | 25 | 5-1/8 | 1 | 20 | 232# |
24" | 23-1/8 | 17-1/4 | 18-1/2 | 2-3/8 | 27 | 5-1/8 | 1 | 17 | 276# |
* "G" Length and configuration of the shaft end will vary to accommodate specific actuators. Refer to the accessory section for typical flatted, keywayed, and hexed end configurations available.
MAX. ΔP is based on 0° disc position, using standard materials of construction at a maximum temperature of 450° Fahrenheit.Consult factory for MAX. ΔP for elevated temperatures.
*Also Available in RPM Drilling in Most Sizes: Consult Factory
Process Development & Control, Inc. reserves the right to make design improvements and/or change dimensions without notice.